The advantage of aluminum alloy enclosure compare with plastic enclosure
The advantage 1 : the hand feeling is better
The aluminum alloy enclosure has been oxidized, so you will feel comfortable and smooth when you hold it.And metal dissipates heat quickly, making it cool to hold hands in the summer.At the same time, the metal shell is more delicate and beautiful, atmospheric.
The advantage 2: Strong and not easy to fragile
Aluminum enclosure of mobile power supply or inverter is more and more strong and resistant believe this, as you know, when you accidentally put the inverter to the ground and if it is plastic enclosure the inverter would fracture or directly was smashed to pieces, but a inverter won't have this situation happened,
This is plastic enclosure cannot compare with aluminum alloy case, also, the aluminum alloy material is fireproof.
The advantage 3:more better safty performance
The aluminum alloy enclosure more stronger than plastic case, there is better protection effect of internal components, and even the inverter happened spontaneous combustion, the aluminum case well keeping the flame to burst hurt yourself.
Place of origin:Guangdong,China
External Size:150×106.2×any size length
Application:Power supply and inverter
Material:Aluminum Alloy or other choice
Product Name:Eletncal Junction Boxes
Function:Install Circuit Board
Surface treatment:Sand blasting
Best-selling of wifi inverter enclosure drawing for check width and height
The reason for the discoloration color of aluminum profiles: time
Like electrolytic coloring, when other things being equal, the color with the extension of time gradually deepened, in general, when determine the oxidation conditions, dyeing liquid concentration, temperature, etc, we only by adjusting the dyeing time in order to obtain the color depth of the customer request, if the dyeing time is very short, have obtained the required color, it has two disadvantages, one is the color fast, it is not easy to get a uniform color, 2 it is color too fast, get enough color weatherability, dyeing time is too long, or no matter how long can achieve the required color depth,Now we have to think about whether the oxide film is too thin or the dye concentration is too low.
Generally, the PH value is required to be 5--6. Stable PH value is very important for dyeing, especially for mixed dyes. Different PH values may have different colors.
After washing, will be washed, aluminum products to remove attached to float on the surface of the aluminum color, at this time to pay attention to the water quality of water tank, because the dye molecules and the combination of the oxide film is reversible, when there is more water impurity ions, prompts the dye molecules and oxidation membrane separation in the water, at this time will show the fade, the fade is often uneven, eventually lead to the same materials produced in color.