Feneng, the professional power supply waterproof box supplier, welcome to customize !
|Place of Origin:||Guangdong, China (Mainland)||Brand Name:||Feleng|
|Model Number:||KS-0257||Protection Level:||IP65-IP67|
|Type:||Extruded enclosure||External Size:||133mmx58mm|
|Dimensions:||W133*H58 mm,||Surface treatment:||Mill finish, anodizing, sandblasted, silk-screen printing etc.|
|Color:||Black, yellow, red, blue, silver||Application:||Inverter|
|Customization:||Acceptable||Product Name||Inverter enclosure|
|Packaging Details||Standard export carton||Delivery Time||Within 5-7 days|
High quality Aluminum extruded enclosure for power supply waterproof box
Best-selling of power supply waterproof box drawing from feneng factory
Note :Indirect extrusion is a similar process, but there are some very important differences, in the direct extrusion process, the mold is not moving, by the extrusion bar pressure to push aluminum alloy through the mold hole. In the indirect extrusion process. The mould is installed on the hollow extrusion rod, which makes the mould extrude towards the motionless aluminum bar blank, forcing the aluminum alloy to extrude towards the hollow extrusion rod through the mould.
In fact, the extrusion process is similar to squeezing toothpaste. When the pressure ACTS on the closed end of the toothpaste, the cylindrical toothpaste is squeezed out from the circular opening. If the opening is flat, the squeezed toothpaste comes in a ribbon. Of course, complex shapes can also be extruded at openings of the same shape. Extruders squeeze aluminum alloys out of mold holes of a certain shape to produce a wide variety of useful products of almost any shape.